To Change/Delete A Programmed One-Touch Dial Key - Minolta DI1610F User Manual

7.6 Setting Up the Fax Registration

To change/delete a programmed one-touch dial key

1
Select the "FAX REGISTRATION".
❍ Refer to "Selecting the "FAX REGISTRATION" menu" on page 7-32.
2
Press the [1] key from the 10-Key
Pad to select "ONE-TOUCH
DIAL".
3
Press the one-touch dial key that
you wish to change or delete.
4
Press the [No] key.
❍ If a one-touch dial key
programmed with a group of
fax numbers or a transmission/
reception function is pressed,
the message shown at the
right appears. To delete the
programmed settings, press
the [No] key. The "FAX
REGISTRATION" menu
appears again.
❍
To change the group dialing or
program dialing settings, refer to page 7-41 and page 7-44.
5
Using the [ ] and [Ö ] keys, select
either "EDIT" or "DELETE", and
then press the [Yes] key.
❍
If "EDIT" was selected, the fax
number is displayed.
(Continue with step 6.)
❍
If "DELETE" was selected, the settings programmed for the one-touch dial
key are deleted and the "SELECT REGIST.KEY" screen appears again.
❍ If you try to change the settings for a one-touch dial number used in group
dialing or program dialing, a confirmation message appears, asking whether
or not to change the corresponding settings programmed in group dialing or
program dialing.
If the [Yes] key is pressed, the corresponding settings programmed in group
dialing or program dialing are changed.
Di1610f
7
7-35