To Send A Fax Manually - Minolta DI1610F User Manual

6

To send a fax manually

1
Load the document into the Automatic Document Feeder.
2
If the "Memory TX" indicator is lit, press the [Memory TX] key to cancel memory
transmission.
3
If necessary, change the "Resolution" setting (p. 5-10).
4
Pick up the telephone receiver.
❍ Check that the dial tone can be
heard.
5
Specify the fax number of the recipient.
❍ Use the telephone to dial the fax number.
❍ The fax number of the recipient can also specified using the keys in the
Control Panel of this machine (p. 5-2).
6
After finishing talking on the phone, the recipient should press the necessary
key to start receiving the fax.
Once the recipient's fax machine is ready, a beep is sounded.
7
Press the [Start] key to begin
scanning and sending the fax.
8
Replace the telephone receiver.
❍ To stop the transmission, press the [Stop] key.
Tip
If the [Speaker] key is pressed instead of picking up the telephone receiver, the
speaker can be used for manual transmission in the same way as described
above.
6-4
6.1 Transmission Methods
Di1610f