Minolta DI1610F User Manual page 119

6
5
Specify the relay station, and then
press the [Yes] key.
❍ Refer to "Dialing" on page 5-2.
A screen appears, allowing you to
specify the relay box ID.
6
Using the 10-Key Pad, enter the
relay box ID.
❍
Enter the relay box ID (20
digits or less) programmed at
the relay station.
❍
If you wish to correct the ID, press the [No] key, and then enter the new
number.
7
Press the [Yes] key.
A screen appears, allowing you to specify the password.
8
Using the 10-Key Pad, enter the
password.
❍ Enter the password (20 digits
or less) if a password has been
set at the relay station.
❍ If you wish to correct the password, press the [No] key, and then enter the
new number.
9
Press the [Start] key to begin scanning and sending the fax.
6-14
6.1 Transmission Methods
Di1610f