To Fax Using Program Dialing - Minolta DI1610F User Manual

5

To fax using program dialing

If one-touch dial keys have already been programmed with fax numbers and a
transmission/reception function (such as timer transmission or polling reception),
that function can be carried out by pressing just the corresponding one-touch dial
key.
For details on setting program dialing, refer to "Specifying the Setting for
"PROGRAM DIAL"" on page 7-44.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder. (This step is not
necessary with polling reception.)
3
If necessary, change the "Resolution" setting (p. 5-10). (This step is not
necessary with polling reception.)
4
Press the one-touch dial key ([01]
through [15]) programmed with the
desired function.
5
Press the [Start] key.
The programmed function
automatically begins.
Tip
If the wrong one-touch dial key has been pressed, press the [Stop] key either
while dialing or sending the fax to stop the operation.
To cancel a timer transmission, select "CANCEL RESERV." from the
"FUNCTION" menu (p. 6-18).
5-6
5.1 Dialing
Di1610f