Minolta DI1610F User Manual page 44

3.4 Control Panel
No. Part Name
9 [Fax] key
10 [Scan] key
11 [Stop] key
12 [Panel Reset] key
13 [123/ABC] key
14 [Start] key
15 [L] [M] key
16 [Zoom] key
17 [Paper] key
18 [ ] [Ö ] key
19 [Auto/Photo] key
20 [Sort] key
21 [2in1] key
22 [Status] key
23 Memory TX lamp
24 Auto RX lamp
25 [Resolution] key
26 [Speaker] key
27 [Phone Book] key
28 [Redial/Pause] key
29 [Speed Dial] key
Di1610f
Description
Press to enter Fax mode. The indicator lights up in green to indicate that
the machine is in Fax mode.
Press to enter Scan mode. The indicator lights up in green to indicate
that the machine is in Scan mode.
(Available only when the Internet Fax & Network Scan Kit is installed.)
• Press to stop a print cycle.
• Press to stop a scanning sequence.
• The indicator flashes in orange when the machine is paused or while
printing.
Press to reset all print functions and settings to their defaults.
Press to switch the 10-Key Pad between typing in numbers and typing
in letters.
• Press to start a scanning or print cycle.
• Press to specify the various settings.
• The indicator lights up in green when the machine can accept print
jobs.
• Press to change the zoom ratio in the range between × 0.50 and
× 2.00 in × 0.01 increments.
• Press to scan through the various settings and information, in order.
• Press to specify the various settings.
Press to select a zoom ratio from among those fixed ratios available as
standard.
Press to select the paper tray that contains the desired paper.
• Press to adjust the image density.
• Press to specify the various settings.
Press to change the image density mode.
Press to select the sort function.
Press to select the 2in1 function.
Press to view the counters and transmission results. In addition, the list
of settings specified for each function and the reports can be printed.
(p. 3-36)
Lights up when the memory transmission function is selected.
Lights up when the automatic reception function is selected.
Used to select the image quality (transmission resolution).
Press to answer the call. Press again to hang up.
Used to display the information programmed for one-touch dialing,
group dialing and speed dialing.
• Redials the last number called.
• While dialing, used to generate a pause when transferring from an
internal to an external line or receiving information services.
Used to dial previously programmed fax numbers represented by 3-digit
numbers.
3
3-11