Table of Contents
Advertisement
3.9 Loading Originals
Positioning Books
When copying an open book or magazine, position the original as detailed below.
1
Raise the Auto Document Feeder.
2
Place the original face down on
the Original Glass.
Note
Do not place books weighting
more than 3 kg on the Original
Glass. In addition, do not press
down extremely hard on the
original, otherwise the
machine may be damaged.
3
Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4
Gently lower the Auto Document Feeder.
Note
While scanning a thick book or other three-dimensional object with the Auto
Document Feeder open, do not look directly at the bright light that may shine
through the Original Glass. Although the light that shines through the
Original Glass is bright, it is not a laser beam and, therefore, is not as
dangerous.
5
Specify the desired copy settings.
❍
"Making Copies" on page 4-1
6
Press the [Start] key to start the print cycle.
Di1610f
3
3-35
Advertisement
Table of Contents
