Specifying The Setting For "Scan Contrast; Specifying The Setting For "Resolution - Minolta DI1610F User Manual

7

Specifying the Setting for "SCAN CONTRAST"

1
Select the "TX OPERATION".
❍ Refer to "Selecting the "TX OPERATION" menu" on page 7-57.
2
Press the [1] key from the 10-Key
Pad to select "SCAN
CONTRAST".
3
Using the [ ] and [Ö ] keys, select
one of the five settings between
"LIGHT" and "DARK", and then
press the [Yes] key.
The "TX OPERATION" menu
appears again.

Specifying the Setting for "RESOLUTION"

1
Select the "TX OPERATION".
❍ Refer to "Selecting the "TX OPERATION" menu" on page 7-57.
2
Press the [2] key from the 10-Key
Pad to select "RESOLUTION".
3
Using the [ ] and [Ö ] keys, select
the desired resolution setting, and
then press the [Yes] key.
❍ The resolution settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
H/T: Half Tone
If "H/T" was selected, a screen appears, allowing you to make a detailed setting.
(Continue with step 4.) If any setting other than "H/T" was selected, the "TX
OPERATION" menu appears again.
7-58
7.7 Setting Up the Transmission
Di1610f