Setup Screens - Kohler MPAC 1500 Manual

5.5

Setup Screens

From the main operation window, press the Set button to
enter the setup screens.
The setup password is required. The default password
is 0000. (The password can be disabled; see
Section 3.4.2.)
System Ready
LD Exer ##/## @ ##:##
Norm ###V Emer ###V
B
View Set Test
Enter Password
Time to Enter #:##
> ? ? ? ? <
OK
Set Time/Date
B Y "
Main
Set Exerciser
B Y "
Main
Set Prime Power Run
B Y "
Main
Set S1 Time Delays
B Y "
Main
Set S2 Time Delays
B Y "
Main
Set Sources
B Y "
Main
Set Inputs/Outputs
B Y "
Main
Set Common Alarms
B Y "
Main
Figure 5-5 Main Setup Screen
TP-6714 4/10
Press the Set button in the main screen to enter the Setup screens.
The setup password is required.
Incorrect Password
Press the down arrow
"
Press the right arrow
Set System
B Y "
Set Communications
B Y "
Main
Set Passwords
B Y "
Main
Calibration
B Y "
Main
Reset Data
B Y "
Main
After entering the system password, use the black arrow
keys to step through the setup screens as shown in
Figure 5-5.
Timeout. After 10 minutes of no activity (no buttons
pressed) the controller exits the setup mode and returns
to the main screen.
Password Disabled
B
button to step to the next screen.
button to enter the detailed setup screen.
Main
Appears if the password disable DIP
switch is set. Press OK to proceed.
OK
Section 5 Setup 59