Table of Contents
Advertisement
Valve Setup
The Setpoint is the outlet temperature of the Mixer Valve to all six outlets.
Input the desired "Setpoint" temperature and decide on a reasonable temperature
range for the setpoint to be within. Input the range using the "Max" and "Min"
values and press "Write".
The "Location" is a name you give to the Sensor Box to identify it (usually the location
of the device). Input a location name (up to 16 characters) and press "Location".
The "Set Calibration No." is used only if the Mixer Valve is required to be calibrated.
This is necessary if the internal Mixer Valve Assembly or the Mixer Valve Control
PCB are replaced. For further details see "Maintenance - Valve Calibration".
Activate any of the outlets to turn the Mixer Valve back on.
The current settings can be retrieved from the valve by pressing "Read".
13
Advertisement
Table of Contents
