Programmable Inputs And Outputs; Main Logic Board Inputs And Outputs; Input/Output Modules - Kohler MPAC 1500 Manual

5.12 Programmable Inputs and
Outputs
Inputs and outputs are unassigned (except as noted in
Figure 5-17) until the installer or operator assigns a
function to the I/O.
The programmable inputs and outputs on the
controller's main logic board and input/output (I/O)
modules can be assigned to the functions shown in
Figure 5-18 and Figure 5-19.
Setup Screen to assign input and output functions . See
Figure 5-16.
Input and output functions can also be assigned over
Modbus using Monitor III software. Refer to the Monitor
III operation manual for instructions.
Each programmable input and output requires a
connection to the transfer switch. Do not change the
programmable input/output
verifying the transfer switch input and output
connections.
Set Inputs/Outputs
B Y "
Main
Set
Main Board I/O
B Y "
Back
Set
Auxiliary I/O
B Y "
Back
Press the down arrow
button to step to the next
module.
Figure 5-16 Assigning Inputs and Outputs
TP-6714 4/10
Use the Input/Output
assignments without
Press the right arrow button to enter the Set Inputs/Outputs screen.
Main Board I/O
Set Inputs
B Y " B
Back
Main Board I/O
Set Outputs
B Y " B
Back
Module #?
Type ### Addr #
Status: #######
B Y " B
Back
B
5.12.1 Main Logic Board Inputs and
Outputs
There are two programmable inputs and two
programmable outputs on the controller's main logic
board. Additional inputs and outputs are available
through the installation of optional input/output
modules.
See the Installation Section for connection information
for main logic board inputs and outputs.

5.12.2 Input/Output Modules

Input/output (I/O) modules are optional accessories.
The standard I/O Module has two inputs and six outputs.
The high-power I/O module has two inputs and three
outputs. The I/O modules specifications are shown in
Section 8.4.
See Section 8.4 for I/O module connection information.
Main Board I/O
Input #?
Y "
Back
Main Board I/O
Outputs #?
Y "
Back
Module ##
Set Inputs
Y " B
Back
Module ##
Set Outputs
Y " B
Back
Input ##
Function
????????
Save Back
Output ##
Function
????????
Save Back
Input ##
Module ##
Function
Input #?
????????
Y "
Back
Output ##
Module ##
Function
Output #?
????????
Y "
Back
Module #?
Uninstall Module?
Section 5 Setup
Save Back
Save Back
Yes/No
Save Back
79