Data Logger Files; Minmax Files; Syncdata Files - Kohler MPAC 1500 Manual

6.4.5

Data Logger Files

Data log files are generated by the USB Data Logger
function. The data log files can be opened with
spreadsheet software. Data log files have the form
DataLogYYMMDDHHMMSS.csv where YYMMDD is
the date (year/month/day), and HHMMSS is the time
that the file was created in hours:minute:seconds. The
file contains time- and date-stamped readings of
voltage, frequency, and contactor position (source 1 or
2).
Figure 6-12 Sample Data Log File
102 Section 6 Communications
6.4.6

MinMax Files

MinMax files are generated by the MinMax function and
can be opened with spreadsheet software. The file
name is MinMax.csv. The file contains minimum and
maximum readings of voltage and current supplied to
the load. The MinMax file is overwritten each time the
MinMax operation is performed.
6.4.7

SyncData Files

The SyncDataLog file
synchronization check test sequence.
3.10.5. The source1
frequencies, and relative phase angle are monitored
and recorded approximately once per second for one
minute during the sync check sequence.
is generated during
See Section
and source2 voltages,
TP-6714 4/10
a