Communications; Set Passwords - Kohler MPAC 1500 Manual

5.16 Communications

Use the communications setup screen to set the
communication parameters for serial or ethernet
connections. See Section 6, Communications, for
instructions.

Set Passwords

B Y "
Main
Figure 5-29 Setting/Changing Passwords
TP-6714 4/10
Setup Password
B Y "
Back
Test Password
B Y "
Back
5.17 Set Passwords
Two passwords control access to the Test and Setup
screens. Passwords are 4-digit numerical values
ranging from 0000 to 9999. The default passwords are
set to 0000. Change the passwords to prevent
unauthorized access to the Test initiation screens and
system settings.
Note: A DIP switch on the controller's main logic board
allows the setup password to be disabled. The
DIP switch does not disable the test password.
Old Password ????
New Password ????
Back Save
Old Password ????
New Password ????
Back Save
Incorrect Password
Incorrect Password
Section 5 Setup 91