Current Sensing - Kohler MPAC 1500 Manual

8.10 Current Sensing

The current sensing kit uses current transformers to
measure the load bus current on all phases. Load
current can then be displayed on the controller screen.
See Section 3.5, Normal Operation Menus.
1
1. Current transformers on load bus
Figure 8-27 Current Sensing Kit
118 Section 8 Accessories
Current transformer kits are designed for your transfer
switch based on the current rating, number of phases,
and transfer switch model.
Use a clamp-on current sensing meter to calibrate the
current. Store the measured current values using the
Calibration screen. See Section 5.18.
2
2. Terminal block TB1 (see wiring diagram GM47803)
GM47965
TP-6714 4/10