Chapter 27
Configuring Network Object NAT
Figure 27-3
In the Translated Addr field, click the browse button
Step 6
Browse Translated Addr dialog box.
Note
Figure 27-4
See the
addresses.
You can also create a new named object from the Browse Translated Addr dialog box and use this object
as the mapped address:
a.
Add the new network object.
Figure 27-5
OL-20339-01
Enabling NAT
The object or group cannot contain a subnet.
You can share this mapped object across different dynamic NAT rules, if desired.
Browse Dialog Box
"Guidelines and Limitations" section on page 27-2
Adding a New Network Object for the NAT Pool
and choose an existing network object from the
for information about disallowed mapped IP
Cisco ASA 5500 Series Configuration Guide using ASDM
Configuring Network Object NAT
27-5