Specifications For Milling - HEIDENHAIN POSITIP 880 User Manual

II – 6 Specifications for Milling
POSITIP 880 Data
Axes
Encoder inputs
Subdivision factor
Display step
Display
Functions
Programming
Error compensation
POSITIP 880
Up to 6 axes from A - Z
6 x 11 µA , 1 V or EnDat (switchable); input frequency max. 100 kHz
PP PP
for incremental or absolute HEIDENHAIN encoders
Signal period:
0.128 µm, 2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm
Line count:
9 000/18 000/36 000
Max. 1 024-fold
Linear axes: 1 mm to 0.005 µm
Rotary axes: 1° to 0.0001° (00°00'01")
Color flat-panel display for position values, dialog and input display, graphic
functions, graphic positioning aid
Multi-lingual text
Status display:
Operating mode, REF, inches, scaling factor, feed rate
Datum number
Tool number and tool axis
Tool compensation R–, R+, R0
REF reference-mark evaluation for distance-coded or single reference marks
Distance-to-go mode, nominal position input (absolute or incremental)
Contour monitoring with magnify function
Scaling factor
HELP: On-screen operating instructions
INFO: Calculator, cutting data calculator, user and operating parameters
99 datum points and 99 tools
Probing functions for datum acquisition, preferably with the KT Edge Finder:
Edge, Center Line and Circle Center
Tool radius compensation
Calculation of positions for bolt hole circles and linear hole patterns
Positioning aids for milling and the roughing out of rectangle pockets
Up to 999 program blocks in each program; sub programming capability; teach-
in programming
Cycles:
Lines, arcs, chamfers, circle patterns, linear patterns and rectangle pockets
Linear and non-linear, up to 128 measuring points
139