HEIDENHAIN POSITIP 880 User Manual page 45

CENTER
Enter the X and Y coordinates of the circle center
(both 50).
Press ENT.
RADIUS
Enter the radius of the circle pattern (20).
Press ENT.
START ANGLE
Enter the start angle (30°).
Press ENT.
DEPTH
Enter the depth of each hole (-5.0).
Press ENT.
When in TOOL field enter the TOOL TABLE and select the
desired tool.
Press USE soft key to begin step.
Pressing the VIEW () soft key will toggle through the
different views of the pattern (Graphic, etc.).
POSITIP 880 45