Designation Of The Axes On Milling Machines; Polar Coordinates - HEIDENHAIN TNC 620 User Manual

Fundamentals | NC fundamentals

Designation of the axes on milling machines

The X, Y and Z axes on your milling machine are also referred to as
tool axis, principal axis (1st axis) and secondary axis (2nd axis). The
assignment of the tool axis is decisive for the assignment of the
principal and secondary axes.
Tool axis Principal axis
X Y
Y Z
Z X

Polar coordinates

If the production drawing is dimensioned in Cartesian coordinates,
you write the NC program using Cartesian coordinates. For parts
containing circular arcs or angles, it is often simpler to give the
dimensions in polar coordinates.
While the Cartesian coordinates X, Y and Z are three-dimensional
and can describe points in space, polar coordinates are two-
dimensional and describe points in a plane. Polar coordinates have
their datum at a circle center (CC), or pole. A position in a plane can
be clearly defined by the:
Polar Radius, the distance from the circle center CC to the
position, and the
Polar Angle, the value of the angle between the angle reference
axis and the line that connects the circle center CC with the
position.
Setting the pole and the angle reference axis
The pole is set by entering two Cartesian coordinates in one of the
three planes. These coordinates also set the reference axis for the
polar angle PA.
Coordinates of the pole (plane)
X/Y
Y/Z
Z/X
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
Secondary axis
Z
X
Y
Angle reference axis
+X
+Y
+Z
3
87