Language; Inch/Mm - HEIDENHAIN POSITIP 880 User Manual

Language

The POSITIP 880 supports multiple languages. To change the
language selection:
Press INFO.
Press the LANGUAGE soft key.
Press the LANGUAGE soft key until the desired language selection
appears on the soft key.
Press USE and confirm your selection. The system will restart.
Changing from one language to another will restart the
system. This is equivalent to cycling power. It will be
necessary to cross over the reference marks to re-
establish the current datum settings and reload the current
program.

Inch/MM

Positions can be displayed and entered in millimeters or inches. If you
choose inches, INCH will be displayed on the status bar at the top of
the screen.
To change the unit of measure:
Press INFO.
Press the INCH/MM soft key.
The unit of measure can also be set in JOB SETUP. Refer to Job
Setup, chapter I-8.
POSITIP 880 95