File Operation Soft Keys - HEIDENHAIN POSITIP 880 User Manual

Operating mode: PROGRAMMING
Press the PROGRAMMING FEATURES soft key.
Press the MULTIPASS soft key. The program block
MULTIPASS appears on the screen.
X AXIS
Enter the nominal position the X axis.
X = 10
Press ENT or cursor to the Z axis.
Z AXIS
Enter the nominal position on the Z axis.
Z= -30
Press ENT.
Press USE.

File Operation Soft Keys

Function
Load from internal storage or to current
program memory
Save current program in memory to internal
storage
Delete program from internal storage
Clear current program in memory
Select a directory for internal storage
Create a name for a new directory
Delete a directory from internal storage
108
Fig. I.84 Multipass cycle block
Soft key
I Operating Instructions