HEIDENHAIN POSITIP 880 User Manual page 79

Automatic example:
Operating mode: EXECUTE PROGRAM
Select AUTOMATIC.
Position by traversing to display value zero.
The display automatically shows the next program
block as soon as you have moved to the displayed
position. The positioning aid automatically switches
to the coordinate axis of the new block.
Call the next program block by pressing NEXT BLOCK.
Function
Start with the block before the current block
(this key is available prior to running a program).
Start with the block after the current block (this
key is available prior to running a program).
Enter into the tool data (this key is available
prior to running a program).
Used in either SINGLE BLOCK or AUTOMATIC
mode. Used only during execution of hole
patterns. Press to advance to the next hole in a
hole pattern.
Used in either SINGLE BLOCK or AUTOMATIC
mode. Used only during execution of hole
patterns. Press to step back to the previous
hole in a hole pattern.
Used in either SINGLE BLOCK or AUTOMATIC
mode. Used only during execution of pocket
patterns. Press to advance to the next step in a
pocket pattern.
Used in SINGLE BLOCK or AUTOMATIC mode
for the operator to advance manually to the
next block within a program.
Press to abort the AUTOMATIC or SINGLE
BLOCK mode and return to the previous
screen.
POSITIP 880
Soft key/Key
79