Programming The Ldap Server - Ricoh 480W Network Manual

Connecting and Setting Up
To finish programming/changing the
LDAP Server
A A A A
Press [Change] after setting each
item.
2
B B B B
Press [Exit].
C C C C
Press [Exit].
D D D D
Press the { { { { User Tools/Counter/Inquiry} } } }
key.
To delete the programmed LDAP
server
A A A A
Press [Delete].
B B B B
Select the LDAP server you want
to delete.
C C C C
Press [Yes].
34

Programming the LDAP Server

To enter an identification name
Register a name for the LDAP server
that will appear on the server selection
screen of the LDAP search operation.
A A A A
Press [Change] under [Identification
Name].
B B B B
Enter the server's identification
name.
C C C C
Press [OK].
To enter a server name
Register the LDAP server's host name
or IP address.
A A A A
Press [Change] under [Server Name].
B B B B
Enter the LDAP server name.
C C C C
Press [OK].
To enter the search base
Select a route folder to start the search
from e-mail addresses registered in
the selected folder are search targets.
A A A A
Press [Change] under [Search Base].
B B B B
Enter the search base.