Horn Inspection; Front Turn Signal Light Replacement; Taillight/Stoplight/Rear Turn Signal Light Bulb Replacement - KYMCO SUPER 9 50 Service Manual

16
. INSTRUMENT/SWITCHES/LIGHTS

HORN INSPECTION

Remove the front upper/lower cover. ( 2-3)
Disconnect the horn wire couplers. The
horn is normal if it sounds when a 12V
battery is connected across the horn wire
terminals.
FRONT TURN SIGNAL LIGHT
REPLACEMENT
Remove the turn signal light shell and the
bulb.
Replace with new ones.
＊
Replace with new bulbs of the same
specifications.
TAILLIGHT/STOPLIGHT/REAR TURN
SIGNAL LIGHT BULB REPLACEMENT
Taillight Shell Removal:
Remove two screws attaching the taillight
shell.
Remove the taillight shell and stop light bulb.
Remove the rear turn signal light bulbs.
The installation sequence is the reverse of
removal.
16-7
Horn Terminal
Taillight Shell
Screws
SUPER 9 50
Battery
Turn Signal Light Bulb