Engine Hanger Bracket Removal - KYMCO SUPER 9 50 Service Manual

5
. ENGINE REMOVAL/INSTALLATION
Remove the two bolts attaching the air
cleaner case.
Loosen the band between the air cleaner
and carburetor to remove the air cleaner
case.
Remove the carburetor cap.
Remove the rear shock absorber lower
mount bolt.
Remove the right and left engine mounting
nuts.
Take out the right and left engine mounting
bolts.
Lift the frame upward to separate it from
the engine and be careful not to damage .
ENGINE HANGER BRACKET
REMOVAL
Remove the engine hanger bracket bolt and
engine hanger bracket.
The installation sequence is the reserve of
removal.
Torque:44.1～53.9N-m
5-3
Band
Carburetor Cap
Rear Shock Absorber Lower Mount Bolt
Engine Mounting Nuts
Engine Hanger Bracket
Engine Hanger Bracket Bolt
SUPER 9 50
Air Cleaner Case
Bolt