6
. CYLINDER HEAD/CYLINDER/PISTON
COMBUSTION CHAMBER
DECABONIZING
Remove the carbon deposits from the
combustion chamber
*
Avoid damaging the combustion cham-
ber wall and cylinder mating surface.
CYLINDER HEAD INSPECTION
Check the cylinder head for warpage with a
straight edge and feeler gauge.
Service Limit:
SH10DA: 0.10mm replace if over
SF10DA: 0.10mm replace if over
CYLINDER HEAD INSTALLATION
Install the cylinder head on the cylinder
properly.
*
Be careful not to damage the mating
surfaces.
Install a new cylinder head gasket onto the
cylinder.
SUPER 9
Combustion Chamber
Mating Surface
Cylinder head Gasket
50
6-4