KYMCO SUPER 9 50 Service Manual page 11

1
. GENERAL INFORMATION
Route harnesses so they are neither
pulled tight nor have excessive slack.
Protect wires and harnesses with
electrical tape or tube if they contact a
sharp edge or corner.
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
Do not break the sheath of wire.
If a wire or harness is with a broken
sheath, repair by wrapping it with
protective tape or replace it.
When installing other parts, do not press
or squeeze the wires.
1-9
SUPER 9
Do not pull too
tight!
Do not press or
squeeze the wire.
50