Steering Handlebar Installation - KYMCO SUPER 9 50 Service Manual

13
. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
INSTALLATION
Install the handlebar onto the steering stem
and install the handlebar lock nut and bolt.
Tighten the bolt to the specified torque.
Torque: 39.2～49.0N-m
Lubricate the throttle grip front end with
grease and then install the throttle grip.
Connect the throttle cable to the throttle grip.
Install the right and left handlebar switches
and tighten the screws.
＊
• Adjust the throttle grip free play to the
specified range of 2～6mm.
Install the front and rear brake master
cylinders.
＊
• Install the brake master cylinders by
aligning the index marks.
SUPER 9
Lock Nut
Throttle Cable
Brake Master Cylinder
Bolt
50
Bolt
Throttle Grip
13-4