Instrument Inspection; Horn & Lights Inspection - KYMCO 50 Owner's Manual

OPERATION
PRI - Instrument inspection
Before you begin your ride, make sure the scooter's instru-
ments are functioning.
1 1 1 1 1
1. Does the speedometer 1 needle move as the scooter
moves?
2. Does the fuel level gauge needle 2 indicate the fuel
level?
3. Do the indicator lights 3 (turn signal and high-beam, for
example) function?
NOTE: Contact your KYMCO dealer for repair of your
scooter's instruments if they are not functioning properly.
2 2 2 2 2
3 3 3 3 3
PRI - Horn & lights inspection
1. Turn on the ignition switch to see if the headlight 4 and
the tail light 5 are illuminated. Check the lenses for dirt
or damage.
2. Squeeze each brake lever to make sure the brake lamp in
the tail light 5 illuminates.
3. Operate the turn signal switch to make sure the turn signals
6 flash. Make sure each of the four signals flash, and the
lenses are free of dirt and are not broken.
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6
6 6 6 6 6
31