Horn Inspection; Fuel Unit - KYMCO Bet & Win 125 User Manual

19
. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS

HORN INSPECTION

Remove the front upper cover. ( 2-5)
Disconnect the horn wire couplers.
The horn is normal if it sounds when a 12V
battery is connected across the horn wire
terminals.

FUEL UNIT

FUEL UNIT INSPECTION
Remove the fuel unit.
Disconnect the fuel unit wire connectors.
Measure the resistance between the fuel unit
wire terminals with the float at upper and
lower positions.
Wire Terminals
Y/W G
33
L/W G
400
Y/W L/W
450
FUEL GAUGE INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch "ON".
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
Check the fuel gauge needle for correct
indication by moving the fuel unit float up
and down.
Float Position
Upper
Lower
Wire Terminals
Y/W G
L/W G
The fuel gauge is normal if it operates as
above indicated. If not, check for loosely
tightened nuts, poorly connected terminals or
shorted wires.
19-5
Upper Lower
45W 500 850
W
700 100 200
W W
750 450 750
W W
Needle Position
"F" (Full)
"E" (Empty)
Needle Position
From E to F
From F to E
Bet & Win 125/150
Lower
Fuel Unit
Upper
Lower
Horn
Upper
Fuel Gauge
Needle moves
from F to E.