Water Pump Bearing/Mechanical Seal Installation - KYMCO SUPER 9 50 Service Manual

11
. COOLING SYSTEM
WATER PUMP BEARING/
MECHANICAL SEAL INSTALLATION
Drive a new water pump shaft outer bearing
into the water pump assembly from the
inside.
Drive a new water pump shaft inside
bearing into the water pump assembly from
the inside.
Drive in a new mechanical seal using a
mechanical seal driver.
＊
Apply sealant to the right crankcase
cover fitting surface of a new mechanical
seal and then drive in the mechanical
seal.
Install the water pump shaft into the water
pump assembly.
SUPER 9
Water Pump Assembly
Outer Bearing
Mechanical Seal
Water Pump Shaft
50
Inside Bearing
11-10