Installing A Pcie Mezzanine Card - Dell PowerEdge FC630 Owner's Manual

Figure 18. Removing a PCIe mezzanine card
1. PCIe mezzanine card
3. PCIe mezzanine card connector (2)
1. Install the PCIe mezzanine card. See the Installing a PCIe mezzanine card section.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions

Installing a PCIe mezzanine card

Before working inside your system
After working inside your system
Installing a PCIe mezzanine card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: You must remove the PCIe mezzanine card to replace a faulty PCIe mezzanine card or
service other components inside the system.
1. Follow the safety guidelines listed in safety instructions section..
2. Remove the PCIe mezzanine card. See the Removing the PCIe mezzanine card section.
1. Open the PCIe mezzanine card retention latch by pressing the release tab on the retention latch and
lift the end of the latch.
2. If present, remove the connector cover from the PCIe mezzanine card bay.
74
2. PCIe mezzanine card retention bracket
4. PCIe mezzanine card retention latch