Dell PowerEdge FC630 Owner's Manual page 39

Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific
memory functions, such as system memory testing and node interleaving.
Related Links
Memory Settings details
System BIOS
Viewing Memory Settings
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
Related Links
Memory Settings
Memory Settings details
Memory Settings details
The Memory Settings screen details are explained as follows:
Option Description
System Memory Specifies the memory size in the system.
Size
System Memory Specifies the type of memory installed in the system.
Type
System Memory Specifies the system memory speed.
Speed
System Memory Specifies the system memory voltage.
Voltage
Video Memory Specifies the amount of video memory.
System Memory Specifies whether the system memory tests are run during system boot. Options
Testing are Enabled and Disabled. This option is set to Disabled by default.
Memory Specifies the memory operating mode. The options available are Optimizer Mode,
Operating Mode Advanced ECC Mode, Mirror Mode, Spare Mode, Spare with Advanced ECC Mode,
Dell Fault Resilient Mode and Dell NUMA Fault Resilient Mode. This option is set
to Optimizer Mode by default.
NOTE: The Memory Operating Mode option can have different default and
available options based on the memory configuration of your system.
39