Installing The Hard Drive Or Ssd Cage - Dell PowerEdge FC630 Owner's Manual

Hide thumbs Also See for PowerEdge FC630:
Table of Contents

Advertisement

Figure 50. Removing a hard drive or SSD cage
1.
standoff (4)
3.
screw (2)
1.
Install the hard drive or SSD cage. See the Installing the hard drive or SSD Cage section.
2.
Install the hard drive or SSD backplane.
3.
Install the hard drive(s) or SSD(s).
4.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Removing the hard drive or SSD backplane

Installing the hard drive or SSD cage

After working inside your system
Removing a hard drive or SSD
Installing the hard drive or SSD cage
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the hard drive or SSD cage to replace a faulty hard drive or SSD cage or
service other components inside the system.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Keep the Phillips #1 screwdriver ready.
108
2.
hard drive or SSD cage
4.
screw hole (2)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E02b

Table of Contents