Dell PowerEdge FC630 Owner's Manual page 92

Figure 33. Installing and removing a processor
1. socket-release lever 1
3. processor
5. processor shield
7. processor socket
Enter an example that illustrates the current task (optional).
1. Replace the processor(s).
2. Install the heat sink.
3. Reinstall the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Installing the cooling shroud
Removing a heat sink
Installing a processor
Installing a heat sink
Removing the cooling shroud
After working inside your system
92
2. pin–1 corner of the processor
4. slot (4)
6. socket-release lever 2
8. tab (4)