Dell PowerEdge FC630 Owner's Manual page 59

Follow the safety guidelines listed in safety instructions section.
1. If you are installing a new sled, remove the plastic cover from the I/O connector(s) and store for
future use.
2. Press the release button on the sled handle to release the sled handle.
3. Align the sled with the sled bay in the enclosure.
4. Slide the sled into the enclosure until the sled connectors are firmly engaged with the midplane
connectors.
5. Press the sled handle until the release button clicks into place.
Figure 9. Installing the sled
1. I/O connector cover
Turn on the sled.
Related Links
Safety instructions
Removing the sled
59