4.
Run the system diagnostics to verify that the new processor operates correctly.
5.
Update the system BIOS.
Related Links
Safety instructions
Before working inside your system
Removing the cooling shroud
Installing a processor
Installing the cooling shroud
After working inside your system
Hard drives or SSDs
Your system supports up to two 2.5-inch SAS or SATA or PCIe SSDs or SAS or SATA hard drives and eight
1.8-inch SATA SSDs. The hard drives or SSDs are supplied in special hot-swappable drive carriers that fit in
the drive bays and these drives connect to the system board through the hard drive backplane board.
NOTE: Mixing of SSD or SAS or SATA hard drives is not supported.
Hard drive or SSD bay numbering
Figure 36. Hard drive or SSD bay numbering — 2.5-inch hard drive or SSD system
96