Reassembly - Suzuki DR 125 Service Manual

5-6 CHASSIS
BRAKE DRUM
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear. Replace the brake drum if the
measurement exceeds the service limit. The value of this limit is
indicated inside the brake drum.
" 09900-20102: Venier calipers
$ Brake drum I.D.
Service Limit: 110.7 mm (4.36 in)
BRAKE SHOES
Inspect the brake shoes wear or damage. If it is worn or dam-
aged, replace it with new ones.
#
Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.

REASSEMBLY

WHEEL BEARINGS
• Apply SUZUKI SUPER GREASE "A" to the bearings before
installing.
% 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Install the wheel bearings by using the special tool.
" 09913-70210: Bearing installer set
#
First, install the left wheel bearing, and then install the
right wheel bearing.
FRONT BRAKE
• When installing the brake camshaft, apply SUZUKI SUPER
GREASE "A" to the camshaft.
% 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)