Suzuki DR 125 Service Manual page 85

• Install the generator stator.
• GENERATOR ROTOR
• Install the generator rotor securely.
• Tighten the generator rotor nut to the specified torque with the
special tool.
! 09930-40113: Rotor holder
" Generator rotor nut: 55 N·m (5.5 kgf-m, 40.0 lb-ft)
• Install the kick starter idle gear 1,washer 2 and snap ring 3
to the driveshaft.
#
Use a new circlip 3.
! 09900-06107: Snap ring pliers
PRIMARY DRIVE GEAR
Install the key 1 onto the crankshaft.
• Install the primary drive gear 2 and oil pump drive gear 3.
NOTE:
Position the oil pump drive gear 3, as shown in the illustration.
ENGINE 3-49