Clutch - Suzuki DR 125 Service Manual

3-52 ENGINE

CLUTCH

Primary driven gear assembly
!
Clutch sleeve hub
"
Clutch push rod
#
Clutch driven plate
$
Clutch drive plate
%
Push piece
Clutch pressure plate
(
ITEM N·m kgf-m
)
50 5.0
• Install the washer 1 and spacer 2 onto the countershaft.
NOTE:
Apply engine oil to the inside and outside surfaces of the spacer.
• Install the primary driven gear assembly 3 and washer 4
onto the countershaft.
NOTE:
When engaging the primary drive and driven gears, turn the pri-
mary driven gear assembly to the counterclockwise.
• Install the clutch sleeve hub 5 and lock washer 6.
#
Install the lock washer so that its tongue A is aligned
with the flat portion of the clutch sleeve hub.
lb-ft
36.0