Suzuki DR 125 Service Manual page 50

3-14 ENGINE
• Remove the pin 1.
• Remove the oil pump 2.
#
Do not attempt to disassemble the oil pump assembly.
PRIMARY DRIVE GEAR
• Flatten the lock washer of the primary drive gear nut.
• Remove the primary drive gear/oil pump drive gear nut with
the special tool.
& 09930-40113: Rotor holder
#
The primary drive gear/oil pump drive gear nut has
left-hand threads.
• Remove the oil pump drive gear 3 and primary drive gear 4.
• Remove the key 5.
• Remove the snap ring 6, washer 7 and kick starter idle gear
8.
& 09900-06107: Snap ring pliers