Adjusting The Seat Pan - Adjasba - Invacare Arrow RWD Service Manual

SECTION 9—FIXED AND ASBA SEAT FRAME
• Reinstall the flip-back armrests from the wheelchair. Refer to Installing/removing
Flip Back Armrests in the owner's manual, part number 1104782 or 1123757.
Mounting Screws
Seat Pan
Seat Positioning Strap
Spacer
Tab
Seat Frame
Locknut
Locknut
Quick Release Pin
FIGURE 9.9 Removing/Installing Seat Pan

Adjusting the Seat Pan - ADJASBA

NOTE: For this procedure, refer to FIGURE 9.10 on page 81.
Removing
1. Remove the seat cushion.
2. Remove the two socket screws securing the seat pan to the seat frame.
3. Remove the seat pan from the seat frame.
Installing
1. Position the new seat pan onto the seat frame as shown.
2. Secure the new seat pan to the seat frame using the two socket screws.
3. Install the seat cushion.
80
3G Storm Series® Wheelchairs Part No. 1104849