Removing/Installing 22Nf Battery Box Tray - Invacare Arrow RWD Service Manual

SECTION 12—BATTERIES
Rear of Chair
Locknuts
Wheelchairs Equipped Without Vent Tray
Rear of Chair
Mounting
Screws
Spacer
Shock
FIGURE 12.13 Removing/Installing Group 24 Battery Box Sub-Frame

Removing/Installing 22NF Battery Box Tray

NOTE: For this procedure, refer to FIGURE 12.14 on page 127.
Removing
1. Remove the battery box. Refer to Removing/Installing Battery Boxes on page 121.
2. Remove the two rear locknuts that secure the battery box tray to battery mount
brackets.
3. Remove the two front bolts and locknuts that secure the battery box tray to the base
frame.
4. Remove the battery tray from the base frame.
3G Storm Series® Wheelchairs
Front of Chair
Spacer
Battery
Box
Sub-Frame
Base
Frame
Front of Chair
126
Mounting Screws
Wiring Harness w/Bracket
Sub-Frame
Wheelchairs Equipped With Vent Tray
Rear of Chair
Mounting
Retainer
Screws
Bar
Shock
Retainer
Spacer
Clip
Battery
Box
Sub-Frame
Base
Frame
Front of Chair
Part No. 1104849