Invacare Arrow RWD Service Manual page 29

Risk of Death, Serious Injury, or Damage
Continued use of the wheelchair that is not set to the correct specifications may
cause erratic behavior of the wheelchair resulting in death, serious injury, or
damage.
Performance adjustments should only be made by professionals of the healthcare
field or persons fully conversant with this process and the driver's capabilities.
After the wheelchair has been set up/adjusted, check to make sure that the
wheelchair performs to the specifications entered during the set up procedure. If
the wheelchair does not perform to specifications, turn the wheelchair Off
immediately and reenter set up specifications. Contact Invacare, if wheelchair still
does not perform to correct specifications.
DO NOT leave the power button ON when entering or exiting your wheelchair.
DO NOT operate on roads, streets or highways.
DO NOT overtighten hardware attaching to the frame. This could cause damage to
the frame tubing.
ALWAYS keep hands and fingers clear of moving parts to avoid injury.
DO NOT use with a broken or missing joystick knob.
DO NOT use if joystick does not spring back to the neutral position or becomes
sticky or sluggish.
DO NOT use if joystick boot is torn or damaged.
ALWAYS check foam grips for looseness before using the wheelchair. If loose,
contact a qualified technician for instructions.
Avoid storage or use near external flame or combustible products.
DO NOT engage or disengage the motor locks until the power is in the OFF position.
Part No. 1104849
SECTION 1—GENERAL GUIDELINES
DANGER
WARNING
WARNING
29
3G Storm Series® Wheelchairs