Specifying Administrator Settings; System Setting - Konica Minolta BIZHUB C250 User Manual

Utility
12.4

Specifying administrator settings

This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [3 Administra-
tor Setting].

System setting

Power Save Setting
Parameter
Low Power Mode Set-
ting
Sleep Mode Setting
Power Save Key
Entering Power Save
Mode (Fax)
Output Setting
Parameter
Print/Fax Output Set-
tings
Output Tray Setting
Reminder
The "Output Tray Setting" parameter is available only if optional finisher
FS-501 is installed.
C250
Description
Specify the desired length of time (be-
tween 10 and 240 minutes) until the ma-
chine enters Low Power mode.
Specify the desired length of time (be-
tween 15 and 240 minutes) until the ma-
chine enters Sleep mode.
Select which low power mode is entered
when the [Power Save] key is pressed.
• Low Power:
The touch panel goes off and the ma-
chine enters a mode where it con-
serves energy.
• Sleep:
Although the machine conserves
more energy in Sleep mode than in
Low Power mode, the machine must
warm up when Sleep mode is can-
celed, therefore taking more prepara-
tion time than Low Power mode.
Specify settings for faxing. For details,
refer to the Facsimile Operations of the
User's Guide.
Description
Specify settings for faxing and printing. For details, refer to the Fac-
simile Operations and Print Operations of the User's Guide.
Select the copy exit tray for each type of
job (copies, printouts, faxes and re-
ports).
12
Default Setting
15 minutes
30 minutes
Low Power
Normal
Default Setting
Copy: Tray 2
Print: Tray 2
Report Output: Tray 1
Fax (Main Line): Tray 1
Fax (2nd Line): Tray 3
12-25