Report Settings - Konica Minolta bizhub c200 User Manual

Assistant tool for C200
Item
Forwarding Desti-
nation
Remote Input
Check
!
Detail
"RX Doc. Settings" can be set to any of the following settings.
Memory RX: Select this setting to save received documents in the All Other Docs. user box without
printing them. To print documents saved in the user box, touch [Doc.] in the Job List screen of the
control panel. For details, refer to the User's Guide [Network Scan/Fax/Network Fax Operations].
Print: Select this setting to immediately print the document once it is received.
Forward: Select this setting to forward the received document to the specified destination. A maximum
of 210 forwarding destinations can be specified.
Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified destination. A maximum of 210 forwarding destinations can be specified.

Report Settings

Specify the settings concerning communication result reports and activity reports.
Item
TX Report
Activity Report
C200
Description
If "Forward" or "Print & Forward" was selected for "RX Doc. Settings", specify the forwarding
destination.
Click the [Select Forward Dest.] button to display a page where forwarding destinations can
be selected. Select the check box for the forwarding destination, and then click the [Apply] but-
ton.
If F-codes are used, select whether remote checking is enabled or disabled.
Description
Single Destination Select "Output OFF", "If TX Fail" or "Output ON" as the condition for print-
ing the report when only one destination has been specified.
Broadcasting Select "Output OFF", "If TX Fail" or "Output ON" as the condition for print-
ing the report when two or more destinations have been specified.
Select whether or not to automatically print the activity report with every
50 communications.
3
3-45