Specifying The Settings; Specifying Settings For General Subscriber Lines (Mode 043); Factory Settings; Specifying Settings For General Subscriber Lines - Konica Minolta bizhub c200 User Manual

Specifying machine functions (software switch settings)
Bits Description
−
3
2 Specify whether or not the bypass tray can be selected when
printing received faxes.
−
1-0
Note
Bits 6, 5 and 4 are available only if optional paper feed cabinets have been installed.
Bit 2 is available only if the optional bypass tray has been installed.
Reminder
Bits 7, 6, 5, 4 and 2 cannot all be set to "0".
2.5.12

Specifying settings for general subscriber lines (mode 043)

Specify the calling method for the general subscriber line.

Factory settings

Bits
Settings

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
−
7-2
1 Specify the calling method for the general subscriber line.
−
0
Note
Bit 1 is available only if the optional fax multi line kit has been installed.
C200
7654 3210
1000 0011 (HEX: 83)
Settings Details
1 *Do not change the setting
for this bit.
0 Cannot be selected
1 Can be selected
00 *Do not change the settings
for these bits.
Settings Details
100000 *Do not change the settings
for these bits.
0 Calls from the specified line
(port 1 or 2), based on the
operation and registration
settings.
1 Calls from the available line
(port 1 or 2), regardless of
the operation and registra-
tion settings.
1 *Do not change the setting
for this bit.
2
2-28