Specifying The Settings - Konica Minolta bizhub c200 User Manual

Specifying network settings
Note
After changing the settings for these parameters, the machine must be turned off, then on again.

Specifying the settings

1
In the Network Settings screen, touch [Basic Settings].
2
Touch [DHCP].
3
Select the method for retrieving the IP address, and then touch [OK].
– If the DHCP server is to be used, touch [Auto Input], and then continue with step 10.
– If a fixed IP address is to be used, touch [IP Input], and then continue with step 4.
4
Touch [IP Address].
5
Use the keypad to type in the IP address, and then touch [OK].
– The IP address cannot be specified to begin with "0.", "127.", or a number greater than "224".
– To enter a number with less than 3 digits, touch [→] to move the cursor to the next number.
6
Touch [Subnet Mask].
C200
1
1-7