Specifying An F Code At Fax Transmission - Konica Minolta bizhub 306 User Manual

4.1 Transmission with F-Code (F-Code TX)
4.1.1

Specifying an F code at fax transmission

Specify an F code when typing in a fax number directly using the Keypad.
1
Enter a destination fax number using the Keypad.
2
Press the , key.
3
Use the +/, key to select [SUB, SID SETTING], then press the OK key.
4
Enter a SUB address using the Keypad, then press the OK key.
% To correct a numeric value, press the Clear/Stop key.
% When entering a password, go to Step 5.
% When not entering a password, press the OK key, and go to Step 6.
5
Enter the password using the Keypad, then press the OK key.
% To correct a numeric value, press the Clear/Stop key.
6
Press the Start key.
This starts scanning and sending.
bizhub 306/266
SUB,SID SETTING
SUB
SID
4
4-4