NEC express5800 A2010b User Manual page 398

Chapter 3 Setup
Tips
Mode Setting/Core Disable page
Use this page to select a mode and specify the number of cores to be disabled. Administrator privilege is
required to use this feature.
Item name
Spare Core Optimization Mode
Spare Core Configuration Mode
Disable CPU Cores
Core Assign Mode
Important
398
The indication on this page differs depending on server model. If you are using Internet
Explorer 8 as a browser and copy & paste the text on the page, information of other models
may be displayed.
Specify the mode to assign cores.
Centralize: Cores are enabled on each
socket intensively. Accordingly, the number
of enabled cores may deviated in each core.
Decentralize: Enabled cores are distributed
to each socket.
Specify the configuration mode for spare
core.
Dynamic: Cores are enabled (codeword is
set) while the OS is running.
Static: Cores are enabled while the OS is not
running.
Specify the number of cores to be disabled.
Allowable value: 0 to maximum number of
cores
The maximum number of cores depends on
server model.
Specify whether cores are assigned equally
to each CPU sockets.
Type1: Does not assign equally.
Type2: Assigns equally.
•
With A2010b and A2020b models, [Disable CPU Cores], [Spare Core Optimization
Mode], and [Spare Core Configuration Mode] in Mode Setting/Core Disable page
are not supported.
•
With A1040b model, [Spare Core Configuration Mode] in Mode Setting/Core
Disable page is not supported.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
 

Current value
7. Using Remote Management
Default setting
Decentralize
Static
0
Type1