NEC express5800 A2010b User Manual page 335

Chapter 3 Setup
User List page
Item
No.
User
Privilege
Operation
SSH
Edit page
Pressing the [Edit] button opens the User Edit page. Setting items are shown below.
Item name
User
User Name
Password
Confirm Password Enter the same character string as password. (*2)
Privilege
Public Key for SSH Select whether SSH public key is registered or not.
Registration of
Public Key for SSH
(*1) 1-byte alphanumeric, [-], and [_] can be accepted. Note that [-] cannot be placed at the top of user
name.
Shows number assigned to the user.
Shows login user name.
The invalid user name is grayed out.
Shows privilege.
A user having administrator privilege who is allowed to perform
Administrator
all operations.
A user who is allowed to operate the server. Session
Operator management, license registration, Remote KVM/Media,
configuration, and update are not allowed.
User General user who can view IPMI information only.
Displays buttons to access user account.
Only the user having administrator privilege can use these buttons.
Shows whether SSH public key is registered or not by an icon.
Select Enable/Disable for the user.
Specify user name. Up to 15 characters can be accepted. (*1)
Set password. Up to 19 characters can be accepted. (*2)
Specify privilege of the user.
Administrator, Operator, or User can be selected.
[Register] must be selected to perform public key authentication in SSH.
To register SSH public key, select a file and register the key. This item is
indispensable if you select [Register].
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management
Description
 

Setup value
335