NEC express5800 A2010b User Manual page 348

Chapter 3 Setup
Edit page when LDAP Authentication is enabled
Use this page to edit authentication information for LDAP authentication.
Setting range and default value
Item name
LDAP Authentication
IP Address
Port
Search Base
Bind Domain Name
Bind Password
Buttons
① [Apply] button
Apply the edited value and return to List page.
② [Default] button
Set the factory-set value. This value is not applied unless [Apply] button is pressed.
③ [Cancel] button
Return to List page without applying the edited value.
Important
348
Select Enable or Disable.
Specify IP address.
Specify port number.
Allowable value range: 1 to 65535
Specify Search Base (Base DN).
Ex: dc=example,dc=com
Specify Bind Domain Name.
Ex: cn=root,dc=example,dc=com
Set Bind Password.
You cannot use ActiveDirectory and LDAP authentication to login the standby web
console.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide

 
Setup value
7. Using Remote Management
Default setting
Disable
0.0.0.0
389
636 if you logged in
with secure mode.
Blank
Blank
Blank